Sand Calculator for Raleigh, NC

Estimate sand for paver base, play areas or fill by cubic yard and ton. Get your numbers below, then request quotes from contractors serving Raleigh, NC.

Length

Width

Depth

Sand type

Waste allowance

Cost per ton (optional)

$/ton

You need approximately

0.48 tons

Recommended with 10% waste: 0.34 cu yd
Area: 100 sq ft

Estimated material cost

$19

Save This Calculation

Ready to start your Raleigh, NC project?

Tell us what you need and we'll match you with local contractors.

Related calculators

Gravel Calculator

Estimate gravel, crushed stone or rock needed by cubic yard and by ton.

Cubic Yard Calculator

Convert length, width and depth into cubic yards for any bulk material.

Stone Calculator

Estimate landscaping stone including flagstone, river rock and rip rap.

Estimates are provided for planning purposes. Actual material requirements may vary based on supplier specifications, compaction, site conditions, installation method, waste, and local code.